Red Flexlight hose M9 Dia. 57mm
Areas of application: Cold and hot air, flue gases, vapours.
Properties: A very light and flexible hose for blowing in and extracting cold and hot air, flue gases and vapours. Type M9 is used in places where both high heat and cold resistance are required. Compared to type V9, the hose is more pressure resistant.
Construction: Mandrel-built hose with a double layer of silicone rubber coated tissue and steel spiral between the two layers. Exterior with 2 white glass curtains. Smooth on the inside and slightly corrugated on the outside.
Material: Glass fabric coated with red silicone rubber. Steel spiral. The outer threads are of white glass cord. Silicone has little abrasion resistance, and therefore the hose must be installed in such a way that it does not wear out on the outside.
Varenummer:
0110272057
Pakke str.:
8 m
Min. bestillingsenhed er:
8 m
Bend radius
57 mm
Diameter inner
57 mm
Length
4 m
Pressure max.
2.4 bar
Temperature max.
+310 °C
Temperature min.
-85 °C
Vacuum max.
0.5 bar
Pakke str.
8 m
Stregkode
463103
Brutto vægt
0,43 Kg
Netto vægt
0,43 Kg
Oprindelsesland
Intrastat varekode
39172290
Areas of application: Cold and hot air, flue gases, vapours.
Properties: A very light and flexible hose for blowing in and extracting cold and hot air, flue gases and vapours. Type M9 is used in places where both high heat and cold resistance are required. Compared to type V9, the hose is more pressure resistant.
Construction: Mandrel-built hose with a double layer of silicone rubber coated tissue and steel spiral between the two layers. Exterior with 2 white glass curtains. Smooth on the inside and slightly corrugated on the outside.
Material: Glass fabric coated with red silicone rubber. Steel spiral. The outer threads are of white glass cord. Silicone has little abrasion resistance, and therefore the hose must be installed in such a way that it does not wear out on the outside.
Copyright © 2025 HydraSpecma