3/4" Throttle/Check valve
Inline throttle/check valve for regulating flow in one direction while allowing free flow in the opposite direction. Used to adjust actuator speed in hydraulic lines where controlled flow is required one way and return flow should pass with minimal restriction.
The valve has G 3/4 BSP connections and is not pressure compensated, meaning the set flow can vary with system pressure and oil viscosity. Zinc-plated surface treatment and NBR sealing are specified for the component.
Typical Applications
- Speed control of hydraulic actuators in one direction with free return flow in the opposite direction
- Inline flow regulation in hydraulic circuits where a check valve bypass is required
Varenummer:
VRF-34
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
Brand Name
OM Oleodinamica Marchesini
C
G 3/4 BSP
CH
32 mm
D
51 mm
E
46 mm
Flow max.
110 lpm
Flowrate nominal LMin
110 lpm
Hexagon
46 mm
L
95 mm
Length
95 mm
Material
Steel
Oil Temperature Recommended
50 °C
Oil viscocity recommended
30 cSt
Pressure compensated
No
Pressure max.
250 bar
Pressure opening
0.5 bar
Sealing material
NBR
Surface treatment
Zinc-plated
Temperature max.
+100 °C
Temperature min.
-30 °C
Thread
G 3/4 BSP
V
G 3/4 BSP
Valve type
Throttle/checkvalve
Pakke str.
1 pcs
Stregkode
197940
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
ITA
Intrastat varekode
84812010
Inline throttle/check valve for regulating flow in one direction while allowing free flow in the opposite direction. Used to adjust actuator speed in hydraulic lines where controlled flow is required one way and return flow should pass with minimal restriction.
The valve has G 3/4 BSP connections and is not pressure compensated, meaning the set flow can vary with system pressure and oil viscosity. Zinc-plated surface treatment and NBR sealing are specified for the component.
Typical Applications
- Speed control of hydraulic actuators in one direction with free return flow in the opposite direction
- Inline flow regulation in hydraulic circuits where a check valve bypass is required
Copyright © 2026 HydraSpecma