3/8" Hydraulichose SPT-106-N - 1SN WP 180 bar
Hydraulic hose for conveying fluids in hydraulic and lubrication circuits. The hose is built with a synthetic rubber inner tube and synthetic rubber cover, reinforced with one high-tensile steel wire braid for pressure capability.
Specified as a 3/8" hose with 9.5 mm inner diameter and 16.9 mm outer diameter. The minimum bend radius of 70 mm supports routing in confined installations while maintaining the hose’s intended flexibility.
Typical Applications
- Hydraulic lines for oil-based fluids in mobile and industrial hydraulic systems
- Fluid transfer for diesel, grease, oil, and water where a 1SN hose is required
Partnumber:
SPT106N
Package size:
1 m
Min. order quantity is:
1 m
Area of use
Diesel, Grease, Oil, Water
Bend radius
70 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
9.5 mm
Diameter outer
16.9 mm
Hose size
3/8 "
Hose type
1SN
Pressure burst min.
720 bar
Pressure max.
180 bar
REACH compliant
Yes
Reinforcement
1 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 853 1SN
Standard ISO
ISO 1436 1SN
Standard SAE
SAE 100R1AT
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Package size
1 m
Barcode
376979
Gross weight
0,30 Kg
Net weight
0,30 Kg
Country of origin
ITA
Intrastat code
40092100
Hydraulic hose for conveying fluids in hydraulic and lubrication circuits. The hose is built with a synthetic rubber inner tube and synthetic rubber cover, reinforced with one high-tensile steel wire braid for pressure capability.
Specified as a 3/8" hose with 9.5 mm inner diameter and 16.9 mm outer diameter. The minimum bend radius of 70 mm supports routing in confined installations while maintaining the hose’s intended flexibility.
Typical Applications
- Hydraulic lines for oil-based fluids in mobile and industrial hydraulic systems
- Fluid transfer for diesel, grease, oil, and water where a 1SN hose is required
Copyright © 2026 HydraSpecma