Reduction - 1/2" BSP x 3/4" BSP female - WD seal
Threaded reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power assemblies. The fitting provides a G 1/2 male connection on one side and a G 3/4 female connection on the other, with a WD profile sealing ring for sealing at the interface.
Designed for applications where a component port and a mating connection have different BSPP thread sizes and a compact reducer is needed. The body has a 36 mm hex for wrenching and a total length of 46 mm. Zinc-nickel plated surface treatment and NBR sealing material are specified. Rated up to 400 bar, with an operating temperature range of -35 to +100 °C.
Typical Applications
- Reducing or adapting BSPP threaded ports and lines in hydraulic manifolds, valve blocks, and piping assemblies
- Repairs and retrofits where an existing G 3/4 female port must be connected to a G 1/2 male threaded component
Varenummer:
RI-12-34ED
Pakkestr.:
1 pcs
Min. bestillingsmengde er:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D2
12 mm
Hexagon
36 mm
L1
46 mm
L2
22 mm
Length
46 mm
Material
Steel
Model code
FI-RED-R1/2-WD-R3/4-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
36 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 3/4 BSP
Thread inner
G 3/4 BSP
Thread outer
G 1/2 BSP
Total length
46 mm
Type
Long
i
14 mm
Pakkestr.
1 pcs
Strekkode
130491
Bruttovekt
0,18 Kg
Nettovekt
0,18 Kg
Opprinnelsesland
DEU
Intrastat produktkode
73071110
Threaded reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power assemblies. The fitting provides a G 1/2 male connection on one side and a G 3/4 female connection on the other, with a WD profile sealing ring for sealing at the interface.
Designed for applications where a component port and a mating connection have different BSPP thread sizes and a compact reducer is needed. The body has a 36 mm hex for wrenching and a total length of 46 mm. Zinc-nickel plated surface treatment and NBR sealing material are specified. Rated up to 400 bar, with an operating temperature range of -35 to +100 °C.
Typical Applications
- Reducing or adapting BSPP threaded ports and lines in hydraulic manifolds, valve blocks, and piping assemblies
- Repairs and retrofits where an existing G 3/4 female port must be connected to a G 1/2 male threaded component
Merk: Å åpne 3D-filer krever et program som stotter filformatet
Copyright © 2026 HydraSpecma