Coupling female push/pull 3CFPV - DN12 - M22x1.5
Female push/pull hydraulic quick coupling for quick connection and disconnection of hydraulic lines. The push/pull function supports coupling and uncoupling by pushing or pulling the sleeve, enabling fast handling where frequent hose changes are required.
Selection is primarily based on nominal size DN12 and the connection thread M22x1.5, ensuring the coupling matches the required flow capacity and port interface in the hydraulic system.
Typical Applications
- Hydraulic hose connections where rapid connection and disconnection are required
- Hydraulic circuits with frequent tool or line changes
Varenummer:
3CFHF081/2215F
Pakkestr.:
1 pcs
Min. bestillingsmengde er:
1 pcs
A
M22x1,5
Arbeidstrykk
250 bar
Arbeidstrykk
25 MPa
B
110,8 mm
D
42 mm
DN
12.5 mm
Diameter rør
15 mm
Flow Nominel LMin
70 lpm
Force To Connect
250 N
Gjenger utvendig metrisk
M22x1,5
ISO størrelse
12.5
Kommentar
O-ring sealing
Korrosjonsmotstand
500 hours salt spray ISO 9227
Materiale
Steel
Merke navn
Faster
Modell kode
3CFPV 1/2215 F
Overflatebehandling
Zinc coating (CR III)
Pakningsmateriale
Polyurethane
Samling under trykk
Not allowed
Sekskant
32 mm
Serie
L
Standard ISO
ISO 7241-1-A
Strømningshastighet
70 lpm
Størrelse
12.5 mm
Størrelse
1/2 "
Størrelse nominelle
08
Søl
2 ml
Temperatur maks.
+100 °C
Temperatur min.
-25 °C
Trykk maks.
250 bar
Trykk spreng min.
1000 bar
Trykkeliminator
Yes
Type
Poppet
X
32 mm
Pakkestr.
1 pcs
Strekkode
422059
Bruttovekt
0,52 Kg
Nettovekt
0,52 Kg
Opprinnelsesland
ITA
Intrastat produktkode
84812010
Female push/pull hydraulic quick coupling for quick connection and disconnection of hydraulic lines. The push/pull function supports coupling and uncoupling by pushing or pulling the sleeve, enabling fast handling where frequent hose changes are required.
Selection is primarily based on nominal size DN12 and the connection thread M22x1.5, ensuring the coupling matches the required flow capacity and port interface in the hydraulic system.
Typical Applications
- Hydraulic hose connections where rapid connection and disconnection are required
- Hydraulic circuits with frequent tool or line changes
Copyright © 2026 HydraSpecma