Weld plate - DIN 1 Twin - Phosphated
Weld plate for mounting a twin pipe clamp arrangement by welding the plate to a structure and using the threaded connection as the clamp fastening point. Designed for DIN 3015 Part 3 installations in size 1.
The plate geometry is defined by the dimensional parameters L 37 mm, B 30 mm, S 3 mm, H 6.5 mm and ØD 12 mm, with an M6 thread. The phosphated (black) surface treatment supports use as a welded mounting base in hydraulic pipe and tube routing where a fixed clamp position is required.
Typical Applications
- Weld-on mounting point for twin pipe clamp installations in hydraulic pipe and tube runs
- Fabrication and repair work where a welded clamp base is used to position and secure lines
Artikelnummer:
SP1D
Förpackningsstorlek:
25 pcs
Minsta beställningskvantitet:
1 pcs
B
30 mm
Brand Name
Stauff
D
12 mm
DIN size
1
G
M6
Group Stauff
1D
H
6,5 mm
L
37 mm
Length
37 mm
Material
Steel
Model code
SP-1D-M-W2
Number of clamps
1
S
3 mm
Standard DIN
DIN 3015 part 3
Surface treatment
Phosphated (black)
Thread
M6
Thread metric
M6
Width
30 mm
Förpackningsstorlek
25 pcs
Streckkod
212840
Bruttovikt
0,03 Kg
Nettovikt
0,03 Kg
Ursprungsland
DEU
Intrastat artikelkod
39259010
Weld plate for mounting a twin pipe clamp arrangement by welding the plate to a structure and using the threaded connection as the clamp fastening point. Designed for DIN 3015 Part 3 installations in size 1.
The plate geometry is defined by the dimensional parameters L 37 mm, B 30 mm, S 3 mm, H 6.5 mm and ØD 12 mm, with an M6 thread. The phosphated (black) surface treatment supports use as a welded mounting base in hydraulic pipe and tube routing where a fixed clamp position is required.
Typical Applications
- Weld-on mounting point for twin pipe clamp installations in hydraulic pipe and tube runs
- Fabrication and repair work where a welded clamp base is used to position and secure lines
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma