XLS 50 Ø25mm SAE-A HPS
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Artikelnummer:
036-0515-003
Förpackningsstorlek:
1 kpl
Minsta beställningskvantitet:
1 kpl
Ajoittainen virtaus Max.
61
Akselin halkaisija
25 mm
Akselin malli
Cyl. Ø 25 mm (10)
Akselin tiivisteen tyyppi
High pressure packing
Asennuslaippa
SAE-A2
Asennusreikä määrä
2
H
151 mm
Integroitu takaiskuventtiili
Yes
Jatkuva virtaus max.
53
Kierrostilavuus
50 cm3
Laipan ohjaimen halkaisija
82.5 mm
Liitäntäkoodi
AA
Lämpötila max.
+82 °C
Lämpötila min.
-34 °C
Maali
Black
Maksimi käyttölämpötila
82
Mallikoodi
XLS
Max. vääntömomentti akselilla
340 Nm
Ohjain ø
82,55 mm
Paine hetkellinen max.
207 bar
Paine jatkuva max.
175 bar
Pituus
151 mm
Porttisijainti
Side
Puhtaustaso min.
20/18/13 - ISO 4406
Pyörimisnopeus jatkuva max.
1037 rpm
Pyörimisnopeus hetkellinen max.
1193 rpm
Reikien halkaisija ø
106.4 mm
Suodatusvaatimus
ISO cleanliness code 4406:20/18/13
Teho hetkellinen max.
18.7 kW
Teho jatkuva max.
13.8 kW
Tulopaine max.
225
Tuotemerkit
Danfoss
Työportit
G 1/2 BSP
Vuotoliitäntä
G 1/4
Vuotolinjan käyttöä koskeva suositus
Optional (Not required due to integrated check valves)
Vääntömomentti hetkellinen max.
150 Nm
Vääntömomentti jatkuva max.
127 Nm
Öljyn viskositeetti suositus
20 - 32 cSt
Pakkestr.
1 kpl
Strekkode
469908
Bruttovekt
Kg
Nettovekt
Kg
Opprinnelsesland
CHN
Intrastat produktkode
84122981
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Merk: Å åpne 3D-filer krever et program som stotter filformatet
Copyright © 2026 HydraSpecma