- Hydraulic hoses
- Hydraulic pipes
- Industrial hoses and couplings
- Machines and tools
- Motors and steering units
- Oil coolers
-
Pipe clamps
- Mounting rails and U-bolts
- Piggyback clamps
- Pipe clamps - DIN3015-1 - Standard series
- Pipe clamps - DIN3015-2 - Heavy series
- Pipe clamps - DIN3015-3 - Twin series
- Pipe clamps - Heavy series with rubber bushing
- Pipe clamps - Lightweight series
- Prevention of Crevice Corrosion for stainless pipework
- Rubber clamps
Electronics - Atos EMEAC
E-ME-AC electronic drivers supply single or double solenoid proportional solenoids without built-in transducer type ZO(R)-A with the correct current signal to align valve regulation to the reference signal.
They are designed to operate in open or closed-loop electronic systems. The driver operates the valve's regulation proportionally to the input reference signal (voltage or current) supplying a switching current to the solenoid. Scale and Bias adjustments, for accurate valve regulations, are available via potentionmeters on the frontpanel. The driver is normally used with a reference signal supplied by an external set-point potentiometer or by PLC control unit and a symmetrical rising and falling ramp generator.
The electronic drivers includes:
- electronic filters on input and output lines,
- CE marking granting conformity to the EMC directive (Electromagnetic Compatibility).
Option /RR = With adjustable dissymmetrical ramps. EMEAC01*: for valves with one solenoid. EMEAC05*: for valves with two solenoids.
Supply voltage: Nominal: 24 Vdc. Rectified and filtered: Vrms = 21 - 33 (max. ripple=2Vpp).
Enabling signal: 5 - 24 Vdc on contact 18a, with led indicator on front panel. By zeroing this signal, the electronic driver is inhibited. Max. power consumption: 50 watt.
Current supplied to solenoid: Imax = 3,3A type pmw square wave; (for ex-proof valves Imax = 2,5A).
Nominal reference signal:
EMEAC01F = 0 to +5V at contact 12c (GND on 8a).
EMEAC05F = +/-5V at contact 12c (GND on 8a). Version */I = 4 - 20 mA at contact 12c (+) and 8a (-).
Reference signal variation range: +/-10V max.; +/-2,5V min.
Potentiometers supply: +5V/50mA at contact 10c (-5V/20mA at contact 14c - only with version EMEAC05F*). Ramp time: 5 sec. max. (0 - 100% of reference signal).
Operating temperature: 0 - 50°C.
Mounting: Eurocard format 100x160 mm. Sockets, ordering code: D558-E-K-32M or D558-E-K-7TE (must be ordered separately).
HYDRASPECMA
– DIN PARTNER FRA IDÉ
TIL SERIEPRODUKTION
Hos HydraSpecma er vi specialiserede i at designe og bygge state-of-the-art hydrauliske og elektriske systemer, skræddersyet til vores kunders forskellige behov på tværs af brancher.
Vores ekspertise stopper ikke bare der. Vi er også førende inden for levering af omfattende slange- & rørledningsartikler – fra højkvalitets slanger og rør til robuste fittings og adaptere – som sikrer problemfri væskekontrol og langtidsholdbar ydeevne.
Vi tilbyder også et stærkt produktudvalg til industrien for vedvarende energi, der understøtter din virksomhed med markedsførende køleløsninger, smøre- og filtreringssystemer, hydrauliske systemer samt slanger, rør og fittings.
Vores passion for innovation matches af vores ansvar for kvalitet. Hvert produkt og system i vores omfattende sortiment afspejler dette. Uanset om du arbejder med komplekse hydrauliske systemer eller søger pålidelige komponenter, leverer vi løsningen, du har brug for.
Tag næste skridt med os og oplev, hvordan præcision og teknik går hånd i hånd – og hvor hver eneste forbindelse handler om mere end komponenter og systemer; det handler om mennesker og deres forretning.