Flexlight M9 red extraction hose - 0110272

Areas of use: Cold and hot air, smoke gases, fumes.

Characteristics: A very light and flexible hose for injection and extraction of cold and hot air, smoke gases and fumes. Type M9 are used in places, where both good resistance to heat and cold are needed. Compared to type V9, this hose has better better pressure data.

Temperature range: -85°C to +300°C. (At a sorrounding temperature of +20°C).

Construction: Mandrel-built hose with a double layer of fabric covered with siliconerubber and a steelspiral between the two layers. Outside with two white glass-cords and light corrugated. Inside smooth.

Material: Glass-fabric covered with red silicone-rubber. Spiral of steel. Outside threads in white glass-cords. Silicone has low wear-resistance, and thus the hose must be mounted in such a way, that theres is no wear on its outside.

Hose clamps: See section 0116 Hose clamps.

Standard length: 4 mtr. (Only available from stock in full lengths). On request also available in other dimensions.

Min. bend radius are measured inside the bend.