3/8" Insert - (12S) M20x1.5 female - 45°
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female threaded end is used to connect a hose line to a matching male threaded port where an angled outlet is required.
Selection is primarily based on hose size (3/8"), the connection thread (M20x1.5 female), and the required bend orientation (45°). The 12S designation identifies the specified connection size/series for this fitting.
Typical Applications
- Hydraulic hose assembly manufacturing and service work
- Hydraulic lines where a 45° outlet helps route the hose and reduce bending at the connection
Varenummer:
GS0612RO20A4
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
A
86,7 mm
B
50,8 mm
D
3/8"
Diameter rør
12 mm
E
18,9 mm
Gjenger innvendig metrisk
M20x1,5
Gjenger metrisk
M36x2
H
24 mm
Korrosjonsmotstand
500 hours salt spray ASTM B-117
Materiale
Steel
Merke navn
Gates
Modell kode
6GS-12FDHORX45
Overflatebehandling
TuffCoat™
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
Serie
S
Slangekoblingstype
For separate ferrule
Slangestørrelse
3/8 "
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Tilspenning moment
48 - 52 Nm
Vinkel
45 °
Package size
0 pcs
Barcode
5412571559927
Gross weight
0,10 Kg
Net weight
0,10 Kg
Country of origin
CZE
Intrastat code
73269098
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female threaded end is used to connect a hose line to a matching male threaded port where an angled outlet is required.
Selection is primarily based on hose size (3/8"), the connection thread (M20x1.5 female), and the required bend orientation (45°). The 12S designation identifies the specified connection size/series for this fitting.
Typical Applications
- Hydraulic hose assembly manufacturing and service work
- Hydraulic lines where a 45° outlet helps route the hose and reduce bending at the connection
Copyright © 2026 HydraSpecma