EHC Position control with rela

Electronic closed loop position control EHC.

EHC is used for the positioning of an actuator in a closed loop control system. The set-point signal is an analogue voltage signal from e.g. a remote control lever. A position transducer on the actuator provides the feedback signal (position signal). EHC compares the set-point signal with the feedback signal and adjusts the oil flow, via the PVG proportional valve, so that the actuator position corresponds to the set-point signal. This means that the actuator shaft or piston rod is moved into and kept in the position corresponding to the controlling movement of the remote control lever.

Partnumber:
155U7905

Package size:
0 pcs

Min. order quantity is:
1 pcs
Brand Name
Danfoss
Package size
0 pcs

Barcode
5704295226675

Gross weight
0,19 Kg

Net weight
0,19 Kg

Country of origin

Intrastat code
84812010

Electronic closed loop position control EHC.

EHC is used for the positioning of an actuator in a closed loop control system. The set-point signal is an analogue voltage signal from e.g. a remote control lever. A position transducer on the actuator provides the feedback signal (position signal). EHC compares the set-point signal with the feedback signal and adjusts the oil flow, via the PVG proportional valve, so that the actuator position corresponds to the set-point signal. This means that the actuator shaft or piston rod is moved into and kept in the position corresponding to the controlling movement of the remote control lever.