Stud fitting - ø12L indv x M16x1.5 - o-ring seal
Straight stud fitting for connecting a 12 mm tube connection in L series to a male metric parallel threaded stud. The male stud end uses an O-ring sealing principle, intended for port connections where sealing is made on the O-ring rather than on the threads.
This fitting is selected primarily by tube outside diameter and series, and by the stud thread size. Zinc-nickel surface treatment and NBR seal material are specified for the sealing interface.
Typical Applications
- Hydraulic pipework where a 12 mm L-series tube connection is adapted to a port with M16x1.5 male stud interface
- General hydraulic connections where O-ring sealed metric parallel threads are required at the port side
Artikelnummer:
EGE12LMED
Förpackningsstorlek:
10 pcs
Minsta beställningskvantitet:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D1
12 mm
D2
8 mm
Diameter pipe
12 mm
L
30,5 mm
L1
30,5 mm
Material
Steel
Model code
FI-EGED-12LM-WD-BV-W3-DKO
PN
400 bar
Pressure max.
500 bar
REACH compliant
Yes
RoHs compliant
Yes
S
22 mm
S1
22 mm
S2
22 mm
Safety factor
4
Sealing material
NBR
Series
L
Surface treatment
Zinc-Nickel plated
T
M16x1,5
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread inner metric
M18x1,5
Thread outer metric
M16x1,5
d1
M16x1,5
d7
22 mm
i
12 mm
Package size
10 pcs
Barcode
128813
Gross weight
0,09 Kg
Net weight
0,09 Kg
Country of origin
DEU
Intrastat code
73071110
Straight stud fitting for connecting a 12 mm tube connection in L series to a male metric parallel threaded stud. The male stud end uses an O-ring sealing principle, intended for port connections where sealing is made on the O-ring rather than on the threads.
This fitting is selected primarily by tube outside diameter and series, and by the stud thread size. Zinc-nickel surface treatment and NBR seal material are specified for the sealing interface.
Typical Applications
- Hydraulic pipework where a 12 mm L-series tube connection is adapted to a port with M16x1.5 male stud interface
- General hydraulic connections where O-ring sealed metric parallel threads are required at the port side
Copyright © 2026 HydraSpecma