Mounting tray for ACT clamps
ACT cable tray for mounting of ACT pipe clamps.
ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced
corrosion resistance by practically excluding metallic and non-metallic impurities during
production, processing and handling.
In order to conform with the Norwegian offshore standard Norsok Z-010, correct spacing of pipe and tube clamps has to be observed.
The following recommendations is made:
"... Instrument tubing shall be supported to field trays or cable ladders for tubing sizes less than 16 mm outside diameter. Cable tray, ladder or equal to be used for larger sizes when mechanical protection is required ..."
Partnumber:
CRA1-8/1DMW55
Package size:
1 st
Min. order quantity is:
1 st
Höjd
20.5 mm
Materialkvalitet
1.4571 / AISI316Ti
Modell kod
CRA-1-8/1D-M-W55
Märke namn
Stauff
Tillverkningsmaterial
Stainless steel
Pakke str.
1 st
Stregkode
487591
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
DEU
Intrastat varekode
39259010
ACT cable tray for mounting of ACT pipe clamps.
ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced
corrosion resistance by practically excluding metallic and non-metallic impurities during
production, processing and handling.
In order to conform with the Norwegian offshore standard Norsok Z-010, correct spacing of pipe and tube clamps has to be observed.
The following recommendations is made:
"... Instrument tubing shall be supported to field trays or cable ladders for tubing sizes less than 16 mm outside diameter. Cable tray, ladder or equal to be used for larger sizes when mechanical protection is required ..."
Copyright © 2025 HydraSpecma