3/8" Insert - (12S) M20x1.5 female - 45°
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female threaded end is used to connect a hose line to a matching male threaded port where an angled outlet is required.
Selection is primarily based on hose size (3/8"), the connection thread (M20x1.5 female), and the required bend orientation (45°). The 12S designation identifies the specified connection size/series for this fitting.
Typical Applications
- Hydraulic hose assembly manufacturing and service work
- Hydraulic lines where a 45° outlet helps route the hose and reduce bending at the connection
Osanumero:
6GS12FDHORX45
Pakkauskoko:
1 pcs
Pienin tilausmäärä on:
1 pcs
A
86,7 mm
B
50,8 mm
D
3/8"
DN
10
E
18,9 mm
H
24 mm
Kierre metrinen
M36x2
Kierre sisä
M20x1,5
Kiristysmomentti
48 - 52 Nm
Korroosionkestävyys
500 hours salt spray ASTM B-117
Kulma
45 °
Letkun kytkentätyyppi
For separate ferrule
Letkunhalkaisija sis.
3/8 "
Lämpötila max.
+100 °C
Lämpötila min.
-35 °C
Mallikoodi
6GS-12FDHORX45
Materiaali
Steel
Pinta
TuffCoat™
Putken halkaisija
12 mm
REACH yhteensopiva
Yes
RoHS yhteensopiva
Yes
Sarja
S
Tiivistysmateriaali
NBR
Tuotemerkit
Gates
Förpackningsstorlek
1 pcs
Streckkod
389463
Bruttovikt
0,10 Kg
Nettovikt
0,10 Kg
Ursprungsland
CZE
Intrastat artikelkod
73269098
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female threaded end is used to connect a hose line to a matching male threaded port where an angled outlet is required.
Selection is primarily based on hose size (3/8"), the connection thread (M20x1.5 female), and the required bend orientation (45°). The 12S designation identifies the specified connection size/series for this fitting.
Typical Applications
- Hydraulic hose assembly manufacturing and service work
- Hydraulic lines where a 45° outlet helps route the hose and reduce bending at the connection
Copyright © 2026 HydraSpecma