08MEUP12 closing plug M12x1,5m
Closing plug for sealing an unused hydraulic port with a metric parallel male thread. The plug seals with an NBR profile sealing ring and is tightened via an internal hex drive.
Selection is mainly based on the thread size and the sealing type. The zinc-nickel plated steel design supports use in hydraulic systems where a defined pressure rating and corrosion resistance are required.
Typical Applications
- Blanking off unused ports in hydraulic components and manifolds
- Temporary or permanent port sealing during system build, testing, or service
Artikelnummer:
138-M12X1.5
Förpackningsstorlek:
250 pcs
Minsta beställningskvantitet:
1 pcs
D1
17 mm
Gänga utv. metrisk
M12x1,5
L1
17,3 mm
Modell kod
VSCHM1215WZN
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
6 mm
T
M12x1,5
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Tillverkningsmaterial
Steel
Tryck max.
400 bar
Ytskiktbehandling
Zinc-Nickel plated
i
12 mm
Åtdragning moment
23 Nm
Package size
250 pcs
Barcode
385535
Gross weight
0,01 Kg
Net weight
0,01 Kg
Country of origin
DEU
Intrastat code
73071110
Closing plug for sealing an unused hydraulic port with a metric parallel male thread. The plug seals with an NBR profile sealing ring and is tightened via an internal hex drive.
Selection is mainly based on the thread size and the sealing type. The zinc-nickel plated steel design supports use in hydraulic systems where a defined pressure rating and corrosion resistance are required.
Typical Applications
- Blanking off unused ports in hydraulic components and manifolds
- Temporary or permanent port sealing during system build, testing, or service
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma