5/8" Hydraulic hose SPT-210CH - 2SC WP 350 bar
Hydraulic hose designed to transfer pressure media in hydraulic systems, with a 5/8" size and a 2-layer high tensile steel wire braid reinforcement for pressure capability.
Constructed with an NBR (nitrile) inner tube and a synthetic rubber cover. The hose is specified for use with diesel, oil, and grease, and supports tight routing with a minimum bend radius of 90 mm.
Typical Applications
- Hydraulic lines for diesel, oil, and grease in pressure systems
- Hose installations where a compact bend radius is required
Artikelnummer:
SPT210CH
Förpackningsstorlek:
0 m
Minsta beställningskvantitet:
1 m
Anvendelsesområde
Diesel, Grease, Oil
Bestillingsenhed
Single hose
Bøjningsradius
90 mm
Diameter indvendig
16 mm
Diameter udvendig
23.6 mm
Flammeresistent
Yes
Forstærkning
2 layer high tensile steel wire braid
Inderrør
NBR (Nitrile)
Mærke navn
Hydraspecma
REACH compliant
Yes
RoHs compliant
Yes
Slangestørrelse
5/8 "
Slangetype
2SC
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperatur intermitterende maks.
+135 °C
Temperatur maks.
+120 °C
Temperatur min.
-40 °C
Tryk maks.
350 bar
Tryk sprængning min.
1400 bar
Yderrør
Synthetic rubber
Förpackningsstorlek
0 m
Streckkod
5704334721376
Bruttovikt
0,28 Kg
Nettovikt
0,28 Kg
Ursprungsland
ROU
Intrastat artikelkod
40092100
Hydraulic hose designed to transfer pressure media in hydraulic systems, with a 5/8" size and a 2-layer high tensile steel wire braid reinforcement for pressure capability.
Constructed with an NBR (nitrile) inner tube and a synthetic rubber cover. The hose is specified for use with diesel, oil, and grease, and supports tight routing with a minimum bend radius of 90 mm.
Typical Applications
- Hydraulic lines for diesel, oil, and grease in pressure systems
- Hose installations where a compact bend radius is required
Copyright © 2026 HydraSpecma