2" ASPIROIL suction hose - 10 bar - 51x64 mm
Areas of use: - petrol - oil - diesel - petroleum - grease - paraffin - lubricating oil - water.
Recommended as pressure hose for mineral oil products such as: petrol, diesel, petroleum, lubrication oil, paraffin, grease etc. Can also be used with water.
Construction: Wear-resistant hose built on mandrel, with built-in steelwires and grounding wires. Electrical discharge via the grounding wires. Electrical resistance lesss than or equal to 10 MOhm, when couplings are mounted correct onto the hose.
Material:
Inner tube: Black synthetic oilresistant Nitrile (NBR).
Outer tube: Black Chloroprene (CR). Weather-, oil- and heat-resistant.
Standards: ISO 1307-1997
Bøjningsradius
235 mm
Diameter indvendig
51 mm
Diameter udvendig
64 mm
Længde
40 m
Slangestørrelse
2 "
Temperatur maks.
+100 °C
Temperatur min.
-30 °C
Tryk maks.
10 bar
Tryk sprængning min.
30 bar
Vakuum maks.
0.9 bar
Pakke str.
0 m
Stregkode
5704334139157
Brutto vægt
1,93 Kg
Netto vægt
1,93 Kg
Oprindelsesland
Intrastat varekode
40093100
Areas of use: - petrol - oil - diesel - petroleum - grease - paraffin - lubricating oil - water.
Recommended as pressure hose for mineral oil products such as: petrol, diesel, petroleum, lubrication oil, paraffin, grease etc. Can also be used with water.
Construction: Wear-resistant hose built on mandrel, with built-in steelwires and grounding wires. Electrical discharge via the grounding wires. Electrical resistance lesss than or equal to 10 MOhm, when couplings are mounted correct onto the hose.
Material:
Inner tube: Black synthetic oilresistant Nitrile (NBR).
Outer tube: Black Chloroprene (CR). Weather-, oil- and heat-resistant.
Standards: ISO 1307-1997
Copyright © 2025 HydraSpecma