Sekvens ventil 35l/m 210Bar (7-97) CP240-2-B-0-A-C-XXX
CP240-2, Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, Internal Drain.
This is a hydraulically pilot operated spool valve, normally closed from port 3 to 2 with the spring chamber referenced to port 2. When the pilot pressure on port 1 reaches the setting, the valve will begin to open port 3 to 2. Port 2 should always be connected to tank. This is ideal for sensing pressure in a remote area of a circuit to sequence another operation.
Varenummer:
132078.000
Pakkestr.:
1 stk
Min. bestillingsmengde er:
1 stk
Cavity
SDC10-3
Flow Nominel
23 lpm
Forureningsgrad maks.
20/18/14 - ISO 4406
Model kode
CP240-2-B-0-A-C-XXX
Mærke navn
Danfoss
Nøglevidde
25.4 mm
Olieviskositet anbefalet
12 - 54 cSt
Pakningsmateriale
NBR
Tilspændingsmoment
41-47 Nm
Tryk maks.
210 bar
Trykindstilling maks.
97 bar
Trykindstilling min.
7 bar
Pakkestr.
1 stk
Strekkode
5704334881674
Bruttovekt
Kg
Nettovekt
Kg
Opprinnelsesland
ita
Intrastat produktkode
84812010
CP240-2, Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, Internal Drain.
This is a hydraulically pilot operated spool valve, normally closed from port 3 to 2 with the spring chamber referenced to port 2. When the pilot pressure on port 1 reaches the setting, the valve will begin to open port 3 to 2. Port 2 should always be connected to tank. This is ideal for sensing pressure in a remote area of a circuit to sequence another operation.
Copyright © 2026 HydraSpecma