- Hydraulic hoses
- Hydraulic pipes
-
Industrial hoses and couplings
- Adaptors Brass
- Bauer - Perrot couplings
- Camlock
- Cement grout
- Claw couplings
- Couplings for high pressure air
- Diary- and pharma couplings
- Disab couplings
- Ferrules for industrial hose
- Fire hydrants couplings
- Fuel coupling for rubber hose
- Hose accessories
- Hose adapter
- Hose clamps
- Hose coupling with flange
- Hose menders
- IBC couplings
- Industrial hoses
- Low pressure adaptors stainless
- Lowpressure adaptors steel
- Rubber expansion joint
- Sandblast couplings
- Steam coupling
- Storz fire hose coupling
- TW coupling
- Machines and tools
- Motors and steering units
- Oil coolers
- Pipe clamps
- Pneumatic
Lubrication pumps - EP1 BEKA-troniX1
EP1 Serie 2175 from Groeneveld-Beka is a robust pump for central lubrication. Desmodromic Drive makes it possible to handle tough climate and applications. Used for lubrication on e.g machinery, industry and construction equipment.
Electrical lubrication pump type EP1
EP1 runs with 12 or 24V. The pump elements deliver 60, 120 or 170mm³ lubricant per stroke. Standard configuration is 15 RPM. The pump can be equipped with a maximum of 3 pump elements. As standard the pump is fitted with 1pcs PE120 with pressure relief vale at position 3.
Pump serie 2175 with timer X1 is our standard lubrication pump. The timer regulates the active and waiting cycles by couting minutes or revolutions on the pump.
Through this controller we can also send alarm signal; too high system pressure and low level.
Cable plug: 7-pol bajonett