3/8" Shuttle valve
Shuttle valve for selecting between two independent pressure lines and passing the higher pressure to a single outlet. This function is commonly used where two alternative pressure signals must feed one control or supply line without backflow between the sources.
The valve has BSPP connections with G 3/8 threads and is designed for hydraulic use up to 350 bar. NBR sealing material is specified, with an operating temperature range of -20 to +100 °C.
Typical Applications
- Selection of the higher-pressure pilot or control signal from two pressure lines
- Combining two alternative pressure sources into one outlet line without cross-communication
Varenummer:
VU2P-38
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
Brand Name
OM Oleodinamica Marchesini
Flow max.
45 lpm
Flow rate nominal LMin
45 lpm
H
40 mm
L
60 mm
L1
104 mm
L2
9 mm
L3
44 mm
Material
Steel
Oil Temperature Recommended
50 °C
Oil viscocity recommended
30 cSt
P
3/8 BSP
Pressure max.
350 bar
S
30 mm
Sealing material
NBR
Surface treatment
Zinc-plated
Temperature max.
+100 °C
Temperature min.
-20 °C
Thread
G 3/8 BSP
U
3/8 BSP
ØD
8,5 mm
Förpackningsstorlek
1 pcs
Streckkod
197966
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
ITA
Intrastat artikelkod
84812010
Shuttle valve for selecting between two independent pressure lines and passing the higher pressure to a single outlet. This function is commonly used where two alternative pressure signals must feed one control or supply line without backflow between the sources.
The valve has BSPP connections with G 3/8 threads and is designed for hydraulic use up to 350 bar. NBR sealing material is specified, with an operating temperature range of -20 to +100 °C.
Typical Applications
- Selection of the higher-pressure pilot or control signal from two pressure lines
- Combining two alternative pressure sources into one outlet line without cross-communication
Copyright © 2026 HydraSpecma