1/2" Shuttle valve
Shuttle valve for hydraulic circuits used to route the higher of two pressure signals to a single outlet. The two inlet ports are marked P, and the outlet port is marked U.
Designed for BSPP connections with G 1/2 threads and NBR sealing. The valve is zinc-plated and specified for up to 70 l/min flow and 350 bar max pressure.
Typical Applications
- Selecting between two independent pressure lines to feed one control or supply line
- Hydraulic circuits where the higher available pressure must be passed on while the other line is blocked
Artikelnummer:
VU2P-12
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
Brand Name
OM Oleodinamica Marchesini
Flow max.
70 lpm
Flow rate nominal LMin
70 lpm
H
50 mm
L
60 mm
L1
104 mm
L2
12 mm
L3
44 mm
Material
Steel
Oil Temperature Recommended
50 °C
Oil viscocity recommended
30 cSt
P
1/2 BSP
Pressure max.
350 bar
S
30 mm
Sealing material
NBR
Surface treatment
Zinc-plated
Temperature max.
+100 °C
Temperature min.
-30 °C
Thread
G 1/2 BSP
U
1/2 BSP
ØD
8,5 mm
Pakke str.
1 pcs
Stregkode
197963
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
ITA
Intrastat varekode
84812010
Shuttle valve for hydraulic circuits used to route the higher of two pressure signals to a single outlet. The two inlet ports are marked P, and the outlet port is marked U.
Designed for BSPP connections with G 1/2 threads and NBR sealing. The valve is zinc-plated and specified for up to 70 l/min flow and 350 bar max pressure.
Typical Applications
- Selecting between two independent pressure lines to feed one control or supply line
- Hydraulic circuits where the higher available pressure must be passed on while the other line is blocked
Copyright © 2026 HydraSpecma