3/4" Throttle/Check valve
Inline throttle/check valve for regulating flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to adjust actuator speed in hydraulic lines where one-way metering is required.
The valve has BSPP G 3/4 connections and is not pressure-compensated, meaning the set flow depends on system pressure and oil viscosity. Suitable for operation up to 250 bar within a temperature range of -30 to +100 °C.
Typical Applications
- One-way flow control for adjusting cylinder or motor speed in hydraulic circuits
- Inline installations where free return flow is required in the opposite direction
Artikelnummer:
VRF-34
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
Brand Name
OM Oleodinamica Marchesini
C
G 3/4 BSP
CH
32 mm
D
51 mm
E
46 mm
Flow max.
110 lpm
Flow rate nominal LMin
110 lpm
Hexagon
46 mm
L
95 mm
Length
95 mm
Material
Steel
Oil Temperature Recommended
50 °C
Oil viscocity recommended
30 cSt
Pressure compensated
No
Pressure max.
250 bar
Pressure opening
0.5 bar
Sealing material
NBR
Surface treatment
Zinc-plated
Temperature max.
+100 °C
Temperature min.
-30 °C
Thread
G 3/4 BSP
V
G 3/4 BSP
Valve type
Throttle/checkvalve
Förpackningsstorlek
1 pcs
Streckkod
197940
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
ITA
Intrastat artikelkod
84812010
Inline throttle/check valve for regulating flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to adjust actuator speed in hydraulic lines where one-way metering is required.
The valve has BSPP G 3/4 connections and is not pressure-compensated, meaning the set flow depends on system pressure and oil viscosity. Suitable for operation up to 250 bar within a temperature range of -30 to +100 °C.
Typical Applications
- One-way flow control for adjusting cylinder or motor speed in hydraulic circuits
- Inline installations where free return flow is required in the opposite direction
Copyright © 2026 HydraSpecma