1/2" Throttle/Check valve
Inline throttle/check valve for controlling flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to set actuator speed in a hydraulic line where controlled flow is required one way and unrestricted return flow is needed the other way.
The valve has G 1/2 BSP female threads on both ports for straightforward inline installation. It is not pressure compensated, so the set flow depends on system pressure and oil viscosity.
Typical Applications
- Speed control of hydraulic actuators with free-flow return in the opposite direction
- One-direction flow restriction in inline hydraulic circuits
Varenummer:
VRF-12
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
Anbefalet olietemperatur
50 °C
C
G 1/2 BSP
CH
27 mm
D
42 mm
E
38 mm
Flow Nominel
70 lpm
Flow maks.
70 lpm
Gevind
G 1/2 BSP
L
80 mm
Længde
80 mm
Materiale
Steel
Mærke navn
OM Oleodinamica Marchesini
Olieviskositet anbefalet
30 cSt
Overfladebehandling
Zinc-plated
Pakningsmateriale
NBR
Sekskant
38 mm
Temperatur maks.
+100 °C
Temperatur min.
-30 °C
Tryk maks.
300 bar
Tryk åbning
0.5 bar
Trykkompenseret
No
V
G 1/2 BSP
Ventiltype
Throttle/checkvalve
Pakke str.
1 pcs
Stregkode
197938
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
ITA
Intrastat varekode
84812010
Inline throttle/check valve for controlling flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to set actuator speed in a hydraulic line where controlled flow is required one way and unrestricted return flow is needed the other way.
The valve has G 1/2 BSP female threads on both ports for straightforward inline installation. It is not pressure compensated, so the set flow depends on system pressure and oil viscosity.
Typical Applications
- Speed control of hydraulic actuators with free-flow return in the opposite direction
- One-direction flow restriction in inline hydraulic circuits
Copyright © 2026 HydraSpecma