1/2" Throttle/Check valve
Inline throttle/check valve for controlling flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to set actuator speed in a hydraulic line where controlled flow is required one way and unrestricted return flow is needed the other way.
The valve has G 1/2 BSP female threads on both ports for straightforward inline installation. It is not pressure compensated, so the set flow depends on system pressure and oil viscosity.
Typical Applications
- Speed control of hydraulic actuators with free-flow return in the opposite direction
- One-direction flow restriction in inline hydraulic circuits
Varenummer:
VRF-12
Pakkestr.:
1 pcs
Min. bestillingsmengde er:
1 pcs
Anbefalt oljetemperatur
50 °C
C
G 1/2 BSP
CH
27 mm
D
42 mm
E
38 mm
Flow Nominel LMin
70 lpm
FlowMaxLMin
70 lpm
Gjenger
G 1/2 BSP
L
80 mm
Lengde
80 mm
Materiale
Steel
Merke navn
OM Oleodinamica Marchesini
Oljeviskositet anbefales
30 cSt
Overflatebehandling
Zinc-plated
Pakningsmateriale
NBR
Sekskant
38 mm
Temperatur maks.
+100 °C
Temperatur min.
-30 °C
Trykk maks.
300 bar
Trykk åpning
0.5 bar
Trykkompensering
No
V
G 1/2 BSP
Ventiltype
Throttle/checkvalve
Pakkestr.
1 pcs
Strekkode
197938
Bruttovekt
Kg
Nettovekt
Kg
Opprinnelsesland
ITA
Intrastat produktkode
84812010
Inline throttle/check valve for controlling flow in one direction while allowing free flow in the opposite direction via an integrated check function. Used to set actuator speed in a hydraulic line where controlled flow is required one way and unrestricted return flow is needed the other way.
The valve has G 1/2 BSP female threads on both ports for straightforward inline installation. It is not pressure compensated, so the set flow depends on system pressure and oil viscosity.
Typical Applications
- Speed control of hydraulic actuators with free-flow return in the opposite direction
- One-direction flow restriction in inline hydraulic circuits
Copyright © 2026 HydraSpecma