Pre-charging unit. universal

Kit for nitrogen filling and pressure regulation of hydraulic accumulators. The kit is compatible with most accumulator types on the market and comes with all necessary components for easy and safe use.

Contents

  • Rubber gasket kit
  • 2 pcs. pressure gauges (0-25 bar and 0-250 bar, both bar and psi)
  • Charging unit
  • 2 direct measuring connections
  • 2 adapters for nitrogen bottle (adapter 5 and 6)
  • 4 adapters for accumulator connection (adapter 1, 2, 3 and 4)
  • Schrader valve adapter (5/8" - 18 UNF, 8V1)
  • 6 mm Allen key
  • 2 meter flexible hose (max. working pressure: 400 bar)


Application areas:

  • Initial filling of nitrogen in accumulators
  • Filling after bladder replacement
  • Periodic check of pre-pressure in accumulators
  • Pressure check during installation
  • Adjusting pre-pressure for changing system needs

Technical details:

  • Max. Working pressure: 400 bar
  • Hose length: 2 meters (can be adapted as needed)
  • Manometer: Ø63 mm, dual scale (bar and psi)
  • Direct connection: M28x1.5 accumulator valve with 6 mm Allen key

Varenummer:
VGU-250

Pakke str.:
1 st

Min. bestillingsenhed er:
1 st
Brand Name
Hydraspecma

Hose length
2000

Hose type
Fleksibel højtryksslange

Pressure max.
400 bar

Thread
5/8-18 UNF
Pakke str.
1 st

Stregkode
182080

Brutto vægt
3,10 Kg

Netto vægt
3,10 Kg

Oprindelsesland
FRA

Intrastat varekode
84186900

Kit for nitrogen filling and pressure regulation of hydraulic accumulators. The kit is compatible with most accumulator types on the market and comes with all necessary components for easy and safe use.

Contents

  • Rubber gasket kit
  • 2 pcs. pressure gauges (0-25 bar and 0-250 bar, both bar and psi)
  • Charging unit
  • 2 direct measuring connections
  • 2 adapters for nitrogen bottle (adapter 5 and 6)
  • 4 adapters for accumulator connection (adapter 1, 2, 3 and 4)
  • Schrader valve adapter (5/8" - 18 UNF, 8V1)
  • 6 mm Allen key
  • 2 meter flexible hose (max. working pressure: 400 bar)


Application areas:

  • Initial filling of nitrogen in accumulators
  • Filling after bladder replacement
  • Periodic check of pre-pressure in accumulators
  • Pressure check during installation
  • Adjusting pre-pressure for changing system needs

Technical details:

  • Max. Working pressure: 400 bar
  • Hose length: 2 meters (can be adapted as needed)
  • Manometer: Ø63 mm, dual scale (bar and psi)
  • Direct connection: M28x1.5 accumulator valve with 6 mm Allen key