1/4" Hydraulic hose SPT-204CH - 2SC WP 430 bar
Hydraulic hose for transferring hydraulic media in pressurised hydraulic systems. The hose is built with a two-layer high tensile steel wire braid reinforcement for high-pressure duty.
Designed with an NBR (nitrile) inner tube and a synthetic rubber cover. Supplied per metre, making it suitable for building custom hose assemblies to the required length.
Typical Applications
- Hydraulic lines for oil, diesel and grease
- High-pressure hydraulic hose routing where a small bend radius is required
Osanumero:
SPT204CH
Pakkauskoko:
1 m
Pienin tilausmäärä on:
1 m
Användingsområde
Diesel, Grease, Oil
Armering
2 layer high tensile steel wire braid
Bestillingsenhed
Single hose
Böjningsradie
50 mm
Diameter inv.
6.4 mm
Diameter utv.
13.3 mm
Flamresistent
Yes
Innertub
NBR (Nitrile)
Modell kod
SPT-204-CH
Märke namn
Hydraspecma
REACH compliant
Yes
RoHs compliant
Yes
Slang godkännanden
ABS, BV, CCS, DNV, KR, LLOYD, MED, NKK, RINA
Slangdimension
1/4 "
Slangtyp
2SC
Standard EN
EN 857 2SC
Standard ISO
ISO 11237 2SC
Temperatur intermittent max.
+100 °C
Temperatur max.
+120 °C
Temperatur min.
-40 °C
Tryck max.
430 bar
Tryck spräng min.
1720 bar
Yttertub
Synthetic rubber
Pakkauskoko
1 m
Viivakoodi
421653
Bruttopaino
0,28 Kg
Nettopaino
0,28 Kg
Alkuperämaa
ITA
Intrastat-koodi
40092100
Hydraulic hose for transferring hydraulic media in pressurised hydraulic systems. The hose is built with a two-layer high tensile steel wire braid reinforcement for high-pressure duty.
Designed with an NBR (nitrile) inner tube and a synthetic rubber cover. Supplied per metre, making it suitable for building custom hose assemblies to the required length.
Typical Applications
- Hydraulic lines for oil, diesel and grease
- High-pressure hydraulic hose routing where a small bend radius is required
Copyright © 2026 HydraSpecma