3/4" Hydraulichose SPT-112-N - 1SN WP 105 bar
Hydraulic hose for conveying fluids in hydraulic and lubrication circuits. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer high tensile steel wire braid for pressure capability and stable hose structure.
The 3/4" hose size with 19 mm inner diameter and 27,2 mm outer diameter is a common selection for medium-flow hydraulic lines. A minimum bend radius of 120 mm supports routing in confined installations while maintaining the hose geometry. The hose meets EN 853 1SN, ISO 1436 1SN and SAE 100R1AT, making it suitable where these hose standards are specified.
Typical Applications
- Hydraulic lines for oil-based systems
- Transfer lines for diesel, grease, oil and water media within the specified temperature range
Artikelnummer:
SPT112N
Förpackningsstorlek:
1 m
Minsta beställningskvantitet:
1 m
Area of use
Diesel, Grease, Oil, Water
Bend radius
120 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
19 mm
Diameter outer
27.2 mm
Hose size
3/4 "
Hose type
1SN
Pressure burst min.
420 bar
Pressure max.
105 bar
REACH compliant
Yes
Reinforcement
1 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 853 1SN
Standard ISO
ISO 1436 1SN
Standard SAE
SAE 100R1AT
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Förpackningsstorlek
1 m
Streckkod
376983
Bruttovikt
0,46 Kg
Nettovikt
0,46 Kg
Ursprungsland
ITA
Intrastat artikelkod
40092100
Hydraulic hose for conveying fluids in hydraulic and lubrication circuits. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer high tensile steel wire braid for pressure capability and stable hose structure.
The 3/4" hose size with 19 mm inner diameter and 27,2 mm outer diameter is a common selection for medium-flow hydraulic lines. A minimum bend radius of 120 mm supports routing in confined installations while maintaining the hose geometry. The hose meets EN 853 1SN, ISO 1436 1SN and SAE 100R1AT, making it suitable where these hose standards are specified.
Typical Applications
- Hydraulic lines for oil-based systems
- Transfer lines for diesel, grease, oil and water media within the specified temperature range
Copyright © 2026 HydraSpecma