3/8" Hydraulichose SPT-106-N - 1SN WP 180 bar
Hydraulic hose in 3/8" size for conveying fluids in hydraulic and fluid transfer lines. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer of high tensile steel wire braid for pressure capability.
Specified to EN 853 1SN, ISO 1436 1SN and SAE 100R1AT. Key selection points include working pressure, minimum bending radius for routing, and inner/outer diameters for flow capacity and fit with hose fittings.
Typical Applications
- Hydraulic and fluid transfer lines for oil, diesel, grease and water media
- Hose assemblies where a 1SN hose type and 3/8" hose size are required
Varenummer:
SPT106N
Pakke str.:
1 m
Min. bestillingsenhed er:
1 m
Användingsområde
Diesel, Grease, Oil, Water
Armering
1 layer high tensile steel wire braid
Böjningsradie
70 mm
Diameter inv.
9.5 mm
Diameter utv.
16.9 mm
Innertub
Synthetic rubber
Märke namn
Hydraspecma
REACH compliant
Yes
RoHs compliant
Yes
Slangdimension
3/8 "
Slangtyp
1SN
Standard EN
EN 853 1SN
Standard ISO
ISO 1436 1SN
Standard SAE
SAE 100R1AT
Temperatur intermittent max.
+120 °C
Temperatur max.
+100 °C
Temperatur min.
-40 °C
Tryck max.
180 bar
Tryck spräng min.
720 bar
Yttertub
Synthetic rubber
Pakke str.
1 m
Stregkode
376979
Brutto vægt
0,30 Kg
Netto vægt
0,30 Kg
Oprindelsesland
ITA
Intrastat varekode
40092100
Hydraulic hose in 3/8" size for conveying fluids in hydraulic and fluid transfer lines. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer of high tensile steel wire braid for pressure capability.
Specified to EN 853 1SN, ISO 1436 1SN and SAE 100R1AT. Key selection points include working pressure, minimum bending radius for routing, and inner/outer diameters for flow capacity and fit with hose fittings.
Typical Applications
- Hydraulic and fluid transfer lines for oil, diesel, grease and water media
- Hose assemblies where a 1SN hose type and 3/8" hose size are required
Copyright © 2026 HydraSpecma