3/8" Hydraulichose SPT-106-N - 1SN WP 180 bar
Hydraulic hose in 3/8" size for conveying fluids in hydraulic and fluid transfer lines. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer of high tensile steel wire braid for pressure capability.
Specified to EN 853 1SN, ISO 1436 1SN and SAE 100R1AT. Key selection points include working pressure, minimum bending radius for routing, and inner/outer diameters for flow capacity and fit with hose fittings.
Typical Applications
- Hydraulic and fluid transfer lines for oil, diesel, grease and water media
- Hose assemblies where a 1SN hose type and 3/8" hose size are required
Artikelnummer:
SPT106N
Förpackningsstorlek:
1 m
Minsta beställningskvantitet:
1 m
Area of use
Diesel, Grease, Oil, Water
Bend radius
70 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
9.5 mm
Diameter outer
16.9 mm
Hose size
3/8 "
Hose type
1SN
Pressure burst min.
720 bar
Pressure max.
180 bar
REACH compliant
Yes
Reinforcement
1 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 853 1SN
Standard ISO
ISO 1436 1SN
Standard SAE
SAE 100R1AT
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Förpackningsstorlek
1 m
Streckkod
376979
Bruttovikt
0,30 Kg
Nettovikt
0,30 Kg
Ursprungsland
ITA
Intrastat artikelkod
40092100
Hydraulic hose in 3/8" size for conveying fluids in hydraulic and fluid transfer lines. The hose is built with a synthetic rubber inner tube and cover, reinforced with 1 layer of high tensile steel wire braid for pressure capability.
Specified to EN 853 1SN, ISO 1436 1SN and SAE 100R1AT. Key selection points include working pressure, minimum bending radius for routing, and inner/outer diameters for flow capacity and fit with hose fittings.
Typical Applications
- Hydraulic and fluid transfer lines for oil, diesel, grease and water media
- Hose assemblies where a 1SN hose type and 3/8" hose size are required
Copyright © 2026 HydraSpecma