Reduction - 3/8" BSP x 1/8" BSP female - WD seal
Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in a hydraulic connection. The fitting provides a G 3/8 external thread on one side and a G 1/8 internal thread on the other, allowing a larger port or component interface to be reduced to a smaller connection size.
The WD profile sealing ring with NBR sealing material provides the sealing function. Zinc-nickel plated surface treatment is specified, with corrosion resistance of 1200 hours salt spray (DIN EN ISO 9227). Rated for a maximum pressure of 630 bar and a temperature range of -35 to +100.
Typical Applications
- Reducing a BSPP port size on hydraulic components to a smaller BSPP connection
- Hydraulic pipework and hose assemblies where a G 3/8 interface must be adapted to G 1/8
Varenummer:
RI-38-18ED
Pakke str.:
100 pcs
Min. bestillingsenhed er:
1 pcs
Diameter rør
0 mm
Gevind indvendig
G 1/8 BSP
Gevind udvendig
G 3/8 BSP
Korrosions resistens
1200 hours salt spray DIN EN ISO 9227
L1
22,5 mm
L2
8,5 mm
Længde
22.5 mm
Materiale
Steel
Model kode
FI-RED-R3/8-WD-R1/8-B-W3
Mærke navn
Stauff
Overfladebehandling
Zinc-Nickel plated
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
S1
22 mm
Sekskant
22 mm
Sikkerhedsfaktor
4
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 3/8 BSP
Thread T2
G 1/8 BSP
Totallængde
22.5 mm
Tryk maks.
630 bar
Type
Short
Vinkel
0 °
i
12 mm
Förpackningsstorlek
100 pcs
Streckkod
130528
Bruttovikt
0,04 Kg
Nettovikt
0,04 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in a hydraulic connection. The fitting provides a G 3/8 external thread on one side and a G 1/8 internal thread on the other, allowing a larger port or component interface to be reduced to a smaller connection size.
The WD profile sealing ring with NBR sealing material provides the sealing function. Zinc-nickel plated surface treatment is specified, with corrosion resistance of 1200 hours salt spray (DIN EN ISO 9227). Rated for a maximum pressure of 630 bar and a temperature range of -35 to +100.
Typical Applications
- Reducing a BSPP port size on hydraulic components to a smaller BSPP connection
- Hydraulic pipework and hose assemblies where a G 3/8 interface must be adapted to G 1/8
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma