Reduction - 3/4"BSP x 1/2"BSP female - WD seal

Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power pipework. The male G 3/4 side screws into a matching female port, while the female G 1/2 side accepts a matching male fitting or component.

Sealing is via a profile sealing ring in NBR, providing a defined seal at the interface. Key selection points are the BSPP thread sizes, the maximum working pressure of 400 bar, and the installation dimensions such as 32 mm hex and 43 mm overall length. The steel body has a zinc-nickel plated surface treatment and is specified for an operating temperature range from -35 °C to +100 °C.

Typical Applications
  • Reducing BSPP port size between hydraulic components and fittings
  • Hydraulic pipework and manifold connections where a profile-sealed threaded reducer is required

Varenummer:
RI-34-12ED

Pakke str.:
50 pcs

Min. bestillingsenhed er:
1 pcs
D2
16 mm

Diameter rør
16 mm

Gevind indvendig
G 1/2 BSP

Gevind udvendig
G 3/4 BSP

Korrosions resistens
1200 hours salt spray DIN EN ISO 9227

L1
43 mm

L2
20 mm

Længde
43 mm

Materiale
Steel

Model kode
FI-RED-R3/4-WD-R1/2-B-W3

Mærke navn
Stauff

Overfladebehandling
Zinc-Nickel plated

Pakningsmateriale
NBR

REACH compliant
Yes

RoHs compliant
Yes

S1
32 mm

Sekskant
32 mm

Sikkerhedsfaktor
4

Temperatur maks.
+100 °C

Temperatur min.
-35 °C

Thread T1
G 3/4 BSP

Thread T2
G 1/2 BSP

Totallængde
43 mm

Tryk maks.
400 bar

Type
Long

Vinkel
0 °

i
16 mm
Pakke str.
50 pcs

Stregkode
130513

Brutto vægt
0,15 Kg

Netto vægt
0,15 Kg

Oprindelsesland
DEU

Intrastat varekode
73071110

Thread reducer for adapting between two BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power pipework. The male G 3/4 side screws into a matching female port, while the female G 1/2 side accepts a matching male fitting or component.

Sealing is via a profile sealing ring in NBR, providing a defined seal at the interface. Key selection points are the BSPP thread sizes, the maximum working pressure of 400 bar, and the installation dimensions such as 32 mm hex and 43 mm overall length. The steel body has a zinc-nickel plated surface treatment and is specified for an operating temperature range from -35 °C to +100 °C.

Typical Applications
  • Reducing BSPP port size between hydraulic components and fittings
  • Hydraulic pipework and manifold connections where a profile-sealed threaded reducer is required

Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet