Reduction - 1/2" BSP x 1 BSP female - WD seal
Thread reducer for adapting between two different BSPP thread sizes in hydraulic and fluid power systems. The connection has a G 1/2 male thread on one side and a G 1 female thread on the other, allowing a larger female port to be connected to a smaller male thread size.
Sealing is via a WD profile sealing ring in NBR, supporting a defined seal at the threaded interface. The steel body is zinc-nickel plated and rated for pressures up to 400 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing BSPP port size when connecting hydraulic components with different thread sizes
- Adapting lines and ports in hydraulic and fluid transfer assemblies where a WD sealing interface is required
Artikelnummer:
RI-12-1ED
Förpackningsstorlek:
10 pcs
Minsta beställningskvantitet:
1 pcs
D2
12 mm
Gänga inv.
G 1 BSP
Gänga utv.
G 1/2 BSP
L1
49 mm
L2
24,5 mm
Längd
49 mm
Modell kod
FI-RED-R1/2-WD-R1-B-W3
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
41 mm
Sexkant
41 mm
Säkerhetsfaktor
4
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1/2 BSP
Thread T2
G 1 BSP
Tillverkningsmaterial
Steel
Totallängd
49 mm
Tryck max.
400 bar
Typ
Long
Vinkel
0 °
Ytskiktbehandling
Zinc-Nickel plated
i
14 mm
Förpackningsstorlek
10 pcs
Streckkod
130489
Bruttovikt
0,22 Kg
Nettovikt
0,22 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two different BSPP thread sizes in hydraulic and fluid power systems. The connection has a G 1/2 male thread on one side and a G 1 female thread on the other, allowing a larger female port to be connected to a smaller male thread size.
Sealing is via a WD profile sealing ring in NBR, supporting a defined seal at the threaded interface. The steel body is zinc-nickel plated and rated for pressures up to 400 bar, with an operating temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing BSPP port size when connecting hydraulic components with different thread sizes
- Adapting lines and ports in hydraulic and fluid transfer assemblies where a WD sealing interface is required
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma