Reduction - 1.1/4" BSP x 1 BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP), with a G 1.1/4 external thread on one side and a G 1 internal thread on the other. The WD profile sealing ring provides sealing at the threaded interface.
Designed for hydraulic and fluid power pipework where a reduction between BSPP port sizes is required. The part is zinc-nickel plated and uses an NBR seal. Rated for a maximum working pressure of 400 bar and a temperature range from -35 to +100.
Typical Applications
- Adapting BSPP port sizes in hydraulic lines, manifolds, and components
- Service and repair work where a G 1.1/4 connection must be reduced to G 1
Artikelnummer:
RI-114-1ED
Förpackningsstorlek:
10 pcs
Minsta beställningskvantitet:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D2
25 mm
Hexagon
50 mm
L1
53 mm
L2
24,5 mm
Length
53 mm
Material
Steel
Model code
FI-RED-R1-1/4-WD-R1-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
50 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 1.1/4 BSP
Thread T2
G 1 BSP
Thread inner
G 1 BSP
Thread outer
G 1.1/4 BSP
Total length
53 mm
Type
Long
i
20 mm
Förpackningsstorlek
10 pcs
Streckkod
130475
Bruttovikt
0,47 Kg
Nettovikt
0,47 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP), with a G 1.1/4 external thread on one side and a G 1 internal thread on the other. The WD profile sealing ring provides sealing at the threaded interface.
Designed for hydraulic and fluid power pipework where a reduction between BSPP port sizes is required. The part is zinc-nickel plated and uses an NBR seal. Rated for a maximum working pressure of 400 bar and a temperature range from -35 to +100.
Typical Applications
- Adapting BSPP port sizes in hydraulic lines, manifolds, and components
- Service and repair work where a G 1.1/4 connection must be reduced to G 1
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma