Reduction - 1.1/4" BSP x 1/2" BSP female - WD seal
Thread reducer for adapting between two different BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power assemblies. The fitting has a G 1.1/4 male thread on one side and a G 1/2 female thread on the other, allowing connection of components with mismatched port sizes.
The WD profile sealing ring design uses an NBR seal to provide the sealing function at the interface. The body is zinc-nickel plated and rated up to 400 bar, with a temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing BSPP port size between hydraulic components, valves, manifolds, and hose assemblies
- Service and retrofit work where existing BSPP ports must be adapted to a different thread size
Artikelnummer:
RI-114-12ED
Förpackningsstorlek:
15 pcs
Minsta beställningskvantitet:
1 pcs
Gänga inv.
G 1/2 BSP
Gänga utv.
G 1.1/4 BSP
L1
32 mm
L2
14,5 mm
Längd
32 mm
Modell kod
FI-RED-R1-1/4-WD-R1/2-B-W3
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
50 mm
Sexkant
50 mm
Säkerhetsfaktor
4
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1.1/4 BSP
Thread T2
G 1/2 BSP
Tillverkningsmaterial
Steel
Totallängd
32 mm
Tryck max.
400 bar
Typ
Short
Vinkel
0 °
Ytskiktbehandling
Zinc-Nickel plated
i
20 mm
Förpackningsstorlek
15 pcs
Streckkod
130473
Bruttovikt
0,31 Kg
Nettovikt
0,31 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two different BSPP (Whitworth parallel) thread sizes in hydraulic and fluid power assemblies. The fitting has a G 1.1/4 male thread on one side and a G 1/2 female thread on the other, allowing connection of components with mismatched port sizes.
The WD profile sealing ring design uses an NBR seal to provide the sealing function at the interface. The body is zinc-nickel plated and rated up to 400 bar, with a temperature range from -35 °C to +100 °C.
Typical Applications
- Reducing BSPP port size between hydraulic components, valves, manifolds, and hose assemblies
- Service and retrofit work where existing BSPP ports must be adapted to a different thread size
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma