Reduction - 1.1/2" BSP x 3/4" BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe thread connections (BSPP) with different sizes. The adapter provides a G 1.1/2 male BSPP thread on one side and a G 3/4 female BSPP thread on the other side, enabling connection of components, ports, or pipework that do not share the same thread size.
The WD sealing principle uses a profile sealing ring in NBR to create the seal at the interface. The body has a zinc-nickel plated surface and is specified for a maximum working pressure of 315 bar, with a temperature range from -35 to +100 °C. Key dimensions for fit and wrench access include total length 36 mm and hex size 55 mm.
Typical Applications
- Hydraulic and fluid power assemblies requiring adaptation between BSPP port sizes
- Service and retrofit work where an existing BSPP port thread size differs from the connected component
Artikelnummer:
RI-112-34ED
Förpackningsstorlek:
10 pcs
Minsta beställningskvantitet:
1 pcs
Gjenger innvendig
G 3/4 BSP
Gjenger utvendig
G 1.1/2 BSP
Korrosjonsmotstand
1200 hours salt spray DIN EN ISO 9227
L1
36 mm
L2
16 mm
Lengde
36 mm
Materiale
Steel
Merke navn
Stauff
Modell kode
FI-RED-R1-1/2-WD-R3/4-B-W3
Overflatebehandling
Zinc-Nickel plated
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
S1
55 mm
Sekskant
55 mm
Sikkerhets faktor
4
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Totallengde
36 mm
Trykk maks.
315 bar
Tråd T1
G 1.1/2 BSP
Tråd T2
G 3/4 BSP
Type
Short
Vinkel
0 °
i
22 mm
Förpackningsstorlek
10 pcs
Streckkod
130468
Bruttovikt
0,41 Kg
Nettovikt
0,41 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two Whitworth parallel pipe thread connections (BSPP) with different sizes. The adapter provides a G 1.1/2 male BSPP thread on one side and a G 3/4 female BSPP thread on the other side, enabling connection of components, ports, or pipework that do not share the same thread size.
The WD sealing principle uses a profile sealing ring in NBR to create the seal at the interface. The body has a zinc-nickel plated surface and is specified for a maximum working pressure of 315 bar, with a temperature range from -35 to +100 °C. Key dimensions for fit and wrench access include total length 36 mm and hex size 55 mm.
Typical Applications
- Hydraulic and fluid power assemblies requiring adaptation between BSPP port sizes
- Service and retrofit work where an existing BSPP port thread size differs from the connected component
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma