Tryck & tempsensor PT
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-060 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Artikelnummer:
PPC-CAN-PT-060
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Gevind
G 1/2 BSP
Materiale
Stainless steel
Mærke navn
Stauff
Sensor type
CAN
Temperatur maks.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivelse maks.
+85 °C
Temperatur omgivelse min.
-25 °C
Tryk maks.
120 bar
Tryk sprængning min.
500 bar
Trykmåling
0-60 Bar
Pakke str.
1 st
Stregkode
356928
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
deu
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-060 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma