Tryck & tempsensor PT
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-016 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Partnumber:
PPC-CAN-PT-016
Package size:
1 pcs
Min. order quantity is:
1 pcs
Gänga
G 1/2 BSP
Märke namn
Stauff
Sensor typ
CAN
Skyddsklass
IP 67
Temperatur max.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivning max.
+85 °C
Temperatur omgivning min.
-25 °C
Tillverkningsmaterial
Stainless steel
Tryck max.
32 bar
Tryck spräng min.
150 bar
Tryckmätning
-1 - 16 Bar
Package size
1 pcs
Barcode
356927
Gross weight
Kg
Net weight
Kg
Country of origin
deu
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-016 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma