Use 1810010792
The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Artikelnummer:
PPC-CAN-P-600
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Gänga
G 1/4 BSP
Modell kod
PPC-CRN-P-600
Märke namn
Stauff
Sensor typ
CAN
Temperatur max.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivning max.
+85 °C
Temperatur omgivning min.
-25 °C
Tillverkningsmaterial
Stainless steel
Tryck max.
1200 bar
Tryck spräng min.
1800 bar
Tryckmätning
0 - 600 Bar
Förpackningsstorlek
1 st
Streckkod
336990
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
deu
Intrastat artikelkod
90262040
The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2025 HydraSpecma