S665-20-45U bulkhead elbow
45° bulkhead elbow for routing hydraulic tubing/lines through a panel or bulkhead while changing direction by 45°. Both ends are male JIC with 37° flare connection, providing a metal-to-metal sealing interface typical for JIC assemblies.
The bulkhead design allows a secure pass-through mounting in a wall or manifold plate, while keeping JIC connections on both sides. Selection is primarily based on the JIC thread size, tube/pipe diameter, pressure rating, and the installation envelope dimensions.
Typical Applications
- Bulkhead/panel pass-through connections where a 45° change of line direction is required
- Hydraulic tubing assemblies using 37° flared JIC connections
Varenummer:
JVSV-12
Pakke str.:
5 pcs
Min. bestillingsenhed er:
1 pcs
Angle
45 °
B
32,5 mm
Brand Name
FOR
C
62 mm
CH
36 mm
Corrosion resistance
1400 hours salt spray DIN EN ISO 9227
D
42,5 mm
Diameter pipe
20 mm
J
1.1/16-12 JIC
J1
1.1/16-12 JIC
Material
Steel
Pressure max.
300 bar
Surface treatment
Electro-galvanized / White chromatized
T
20 mm
T1
20 mm
Thread outer
1.1/16-12 JIC
Förpackningsstorlek
5 pcs
Streckkod
144288
Bruttovikt
0,28 Kg
Nettovikt
0,28 Kg
Ursprungsland
ITA
Intrastat artikelkod
73071110
45° bulkhead elbow for routing hydraulic tubing/lines through a panel or bulkhead while changing direction by 45°. Both ends are male JIC with 37° flare connection, providing a metal-to-metal sealing interface typical for JIC assemblies.
The bulkhead design allows a secure pass-through mounting in a wall or manifold plate, while keeping JIC connections on both sides. Selection is primarily based on the JIC thread size, tube/pipe diameter, pressure rating, and the installation envelope dimensions.
Typical Applications
- Bulkhead/panel pass-through connections where a 45° change of line direction is required
- Hydraulic tubing assemblies using 37° flared JIC connections
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma