Saip pre-charging unit M28x1,5 accumulator
Kit for checking and adjusting pre-pressure in hydraulic accumulators. Used for filling with nitrogen and pressure testing - both for installation, service and bladder replacement.
Contents:
- Valve body with ring nut
- Connection to gas valve on accumulator
- Manometer, vent and return
- 3 meter high pressure hose with bottle coupling
- Hose nipple for pressure reducing valve
- Gasket kit
- Plastic case
Application:
- Checking pre-pressure
- Filling nitrogen after service
- Adjusting pre-pressure during installation
- Max. working pressure: 350 bar
- Hose length: 3 m
Technical data:
Varenummer:
DP1-400
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Brand Name
Saip
Pressure max.
350 bar
Pakke str.
1 st
Stregkode
430799
Brutto vægt
2,00 Kg
Netto vægt
2,00 Kg
Oprindelsesland
ITA
Intrastat varekode
73110091
Kit for checking and adjusting pre-pressure in hydraulic accumulators. Used for filling with nitrogen and pressure testing - both for installation, service and bladder replacement.
Contents:
- Valve body with ring nut
- Connection to gas valve on accumulator
- Manometer, vent and return
- 3 meter high pressure hose with bottle coupling
- Hose nipple for pressure reducing valve
- Gasket kit
- Plastic case
Application:
- Checking pre-pressure
- Filling nitrogen after service
- Adjusting pre-pressure during installation
- Max. working pressure: 350 bar
- Hose length: 3 m
Technical data:
Copyright © 2025 HydraSpecma