Premium Chem Master UHMWPE SD Dim.: 3 (75 x 91mm)
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Varenummer:
CMUSD-75
Pakke str.:
61 m
Min. bestillingsenhed er:
1 m
Användingsområde
Chemicals compatible with UHMWPE
Böjningsradie
375 mm
Diameter inv.
75 mm
Diameter utv.
91 mm
Elektrisk konduktivitet
R < 10^6 Ohm
Färg
Black
Innertub
UHMWPE
Längd
40 m
Märke namn
Danfoss
Standard EN
EN 12115
Storlek
3 "
Temperatur intermittent max.
+130 °C
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Tillverkningsmaterial
UHMWPE
Tryck max.
16 bar
Tryck spräng min.
64 bar
Vakuum max.
0.9 bar
Yttertub
CSM (Chlorosulfinated Polyethylene) based
Pakke str.
61 m
Stregkode
228452
Brutto vægt
3,10 Kg
Netto vægt
3,10 Kg
Oprindelsesland
TUR
Intrastat varekode
40094100
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Copyright © 2026 HydraSpecma