Kemikalieslang Chem Master UHMWPE SD 38x6.5xCL40
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Osanumero:
CMUSD-38
Pakkauskoko:
61 m
Pienin tilausmäärä on:
1 m
Halkaisija sis
38 mm
Halkaisija ulko
51 mm
Hetkellinen lämpötila max.
+130 °C
Koko
1.1/2 "
Lämpötila max.
+100 °C
Lämpötila min.
-35 °C
Materiaali
UHMWPE
Ominaisvastus
R < 10^6 Ohm
Paine max.
16 bar
Pituus
40 m
Räjähdyspaine min.
64 bar
Sisäputki
UHMWPE
Soveltamisala
Chemicals compatible with UHMWPE
Standardi EN
EN 12115
Taivutussäde
190 mm
Ulkopinta
CSM (Chlorosulfinated Polyethylene) based
Vakuumi maks.
0.9 bar
Väri
Black
Pakkauskoko
61 m
Viivakoodi
228448
Bruttopaino
1,20 Kg
Nettopaino
1,20 Kg
Alkuperämaa
swe
Areas of use: Industrial chemicals, mineral oil products, solvents, acids, alkalis.
Characteristics: Very universal suction and discharge hose (SD) according to EN12115 capable of handling a wide spectrum of corrosive chemicals and acids. The hose contains a wire helix for full suction capability. For resistance table - contact HydraSpecma A/S.
Electrical conductivity: R<106 Ohm. Construction: Mandrel-built suction- and pressure hose with reinforcements of woven yarns and steel-spiral between the layers. Electrical discharge through inner-liner and antistatic wires.
Materials: Inside: UHMWPE, black, smooth and conductive. Outside: CSM rubber, black, superior resistance to weather and abrasion, excellent chemical and oil resistance.
Couplings: We recommend - for safety reasons: Always use couplings with safety clamps according to EN 14420-3 / DIN 2817.
Copyright © 2026 HydraSpecma