1" Insert - (25S) M36x2 female - 45°
Hydraulic hose insert designed to be assembled with a separate ferrule. The 45° angled female metric thread connection supports routing the hose line where a straight fitting would cause tight bends or limited clearance.
Selection is primarily based on hose size 1", the female thread M36x2, and the 45° connection angle to match the required port interface and hose routing.
Typical Applications
- Hydraulic hose assemblies where a 45° angled female metric connection is required
- Hose routing in confined spaces to reduce hose bending at the connection point
Varenummer:
16GS25FDHORX45
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
A
159,7 mm
B
103,3 mm
D
1"
DN
25
Diameter rør
25 mm
E
35,1 mm
Gevind indvendig metrisk
M36x2
Gevind metrisk
M36x2
H
46 mm
Korrosions resistens
500 hours salt spray ASTM B-117
Materiale
Steel
Model kode
16GS-25FDHORX45
Mærke navn
Gates
Overfladebehandling
TuffCoat™
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
Serie
S
Slangekoblingstype
For separate ferrule
Slangestørrelse
1 "
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Tilspændingsmoment
125 - 135 Nm
Tryk maks.
420 bar
Vinkel
45 °
Pakke str.
1 pcs
Stregkode
200499
Brutto vægt
0,65 Kg
Netto vægt
0,65 Kg
Oprindelsesland
CZE
Intrastat varekode
73269098
Hydraulic hose insert designed to be assembled with a separate ferrule. The 45° angled female metric thread connection supports routing the hose line where a straight fitting would cause tight bends or limited clearance.
Selection is primarily based on hose size 1", the female thread M36x2, and the 45° connection angle to match the required port interface and hose routing.
Typical Applications
- Hydraulic hose assemblies where a 45° angled female metric connection is required
- Hose routing in confined spaces to reduce hose bending at the connection point
Copyright © 2026 HydraSpecma