3/4" Insert - (25S) M36x2 female - 45°
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female end helps route the hose connection where a straight fitting would be difficult due to space or hose routing.
Specified for 3/4" hose and supplied with an M36x2 female thread interface. Selection is primarily based on hose size, required thread, and the 45° bend angle in the connection point.
Typical Applications
- Hydraulic hose assemblies where an angled threaded connection is required
- Hose routing in confined installations requiring a 45° connection orientation
Artikelnummer:
12GS25FDHORX45
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
A
137,3 mm
B
86,3 mm
D
3/4"
DN
20
Diameter rör
25 mm
E
31,2 mm
Gänga inv. metrisk
M36x2
Gänga metrisk
M36x2
H
46 mm
Modell kod
12GS-25FDHORX45
Märke namn
Gates
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
500 hours salt spray ASTM B-117
Serie
S
Slangdimension
3/4 "
Slangkopplingstyp
For separate ferrule
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Tillverkningsmaterial
Steel
Tryck max.
420 bar
Vinkel
45 °
Ytskiktbehandling
TuffCoat™
Åtdragning moment
125 - 135 Nm
Förpackningsstorlek
1 pcs
Streckkod
200357
Bruttovikt
0,53 Kg
Nettovikt
0,53 Kg
Ursprungsland
CZE
Intrastat artikelkod
73269098
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female end helps route the hose connection where a straight fitting would be difficult due to space or hose routing.
Specified for 3/4" hose and supplied with an M36x2 female thread interface. Selection is primarily based on hose size, required thread, and the 45° bend angle in the connection point.
Typical Applications
- Hydraulic hose assemblies where an angled threaded connection is required
- Hose routing in confined installations requiring a 45° connection orientation
Copyright © 2026 HydraSpecma