Smörjnippel H1 Rak 3/8'' BSW
Areas of use: Cold and hot air, smoke gases, vapors.
_x000D_Properties: A very light and flexible hose for blowing in and sucking out cold and hot air, smoke gases and vapours. Type V9 is used in places where both high heat and cold resistance is required and is therefore used in e.g. the aviation industry.
_x000D_Construction: Mandrel-built hose with an internal exposed steel coil that is vulcanized together with a layer of silicone rubber coated fabric. Exterior with white glass cord. The hose is very slightly corrugated.
_x000D_Material: Glass cloth coated with red silicone rubber. Steel spiral. The outer thread is white glass cord. Silicone has little abrasion resistance, so the hose must be installed in such a way that it does not wear out on the outside.
Varenummer:
1101152
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Pakke str.
1 st
Stregkode
261590
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
deu
Areas of use: Cold and hot air, smoke gases, vapors.
_x000D_Properties: A very light and flexible hose for blowing in and sucking out cold and hot air, smoke gases and vapours. Type V9 is used in places where both high heat and cold resistance is required and is therefore used in e.g. the aviation industry.
_x000D_Construction: Mandrel-built hose with an internal exposed steel coil that is vulcanized together with a layer of silicone rubber coated fabric. Exterior with white glass cord. The hose is very slightly corrugated.
_x000D_Material: Glass cloth coated with red silicone rubber. Steel spiral. The outer thread is white glass cord. Silicone has little abrasion resistance, so the hose must be installed in such a way that it does not wear out on the outside.
Copyright © 2026 HydraSpecma