5/8" Insert - (20S) M30x2 female - 45°
Hydraulic hose insert for assembling a hose end with a separate ferrule. The 45° angled design helps route the hose where a straight fitting would create an unfavorable bend or limited clearance.
Configured with a 5/8" hose insert interface and an M30x2 female threaded port. The 45° elbow angle is a key selection factor when directing the hose line to match the required layout.
Typical Applications
- Hydraulic hose assemblies where a 45° outlet direction is required
- Hose routing in confined installations where bend direction and space are critical
Artikelnummer:
10GS20FDHORX45
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
A
121,6 mm
B
71,3 mm
D
5/8"
DN
16
Diameter rör
20 mm
E
24,9 mm
Gänga inv. metrisk
M30x2
H
36 mm
Modell kod
10GS-20FDHORX45
Märke namn
Gates
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
500 hours salt spray ASTM B-117
Serie
S
Slangdimension
5/8 "
Slangkopplingstyp
For separate ferrule
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Tillverkningsmaterial
Steel
Vinkel
45 °
Ytskiktbehandling
TuffCoat™
Åtdragning moment
105 - 115 Nm
Pakkauskoko
1 pcs
Viivakoodi
200129
Bruttopaino
0,29 Kg
Nettopaino
0,29 Kg
Alkuperämaa
CZE
Intrastat-koodi
73269098
Hydraulic hose insert for assembling a hose end with a separate ferrule. The 45° angled design helps route the hose where a straight fitting would create an unfavorable bend or limited clearance.
Configured with a 5/8" hose insert interface and an M30x2 female threaded port. The 45° elbow angle is a key selection factor when directing the hose line to match the required layout.
Typical Applications
- Hydraulic hose assemblies where a 45° outlet direction is required
- Hose routing in confined installations where bend direction and space are critical
Copyright © 2026 HydraSpecma