XLS 50 Ø25mm SAE-A HPS
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Partnumber:
036-0515-003
Package size:
1 st
Min. order quantity is:
1 st
Antal monteringshål
2
Arbetsportar
G 1/2 BSP
Axel diameter
25 mm
Axeltyp
Cyl. Ø 25 mm (10)
Bultcirkel
106.4 mm
Deplacement
50 cm3
Dimension H
151 mm
Dräneringsport
G 1/4 BSP
Filtreringskrav
ISO cleanliness code 4406:20/18/13
Flänsens styrdiameter
82.5 mm
Färg
Black
Föroreningsgrad max.
20/18/13 - ISO 4406
Ingångstryck Max.
225
Integrerad backventil
Yes
Intermittent Rotationshastighet Max.
1193
Intermittent effekt Max.
18.7
Intermittent flöde Max.
61
Intermittent vridmoment Max.
150 Nm
Kont. rotation max.
1037 rpm
Kontinuerlig effekt max.
13.8 kW
Kontinuerligt flöde Max.
53
Krav på dräneringsledning
Optional (Not required due to integrated check valves)
Längd
151 mm
Max. driftstemperatur
82 °C
Max. vridmoment på axel
340 Nm
Modell kod
XLS
Moment kontinuerlig max.
127 Nm
Monteringsfläns
SAE-A2
Märke namn
Danfoss
Oljeviskositet rekommanderad
20 - 32 cSt
Portkod
AA
Portplacering
Side
Reces
82,55 mm
Temperatur max.
+82 °C
Temperatur min.
-34 °C
Tryck intermittent max.
207 bar
Tryck kontinuerlig max.
175 bar
Typ av axeltätning
High pressure packing
Package size
1 st
Barcode
469908
Gross weight
Kg
Net weight
Kg
Country of origin
CHN
Intrastat code
84122981
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Note: Opening 3D files requires a program that supports the file format
Copyright © 2025 HydraSpecma