XLS 100 Ø25.5mm 6B Spline SAE-A HPS
The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.
Key Advantages
- High efficiency at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Integrated check valve as standard
- Available with standard or high-pressure shaft seal
- Displacement range: 50 to 395 cm³
- Max. continuous pressure up to 175 bar
- Max. intermittent torque up to 503 Nm
- High speed capability (up to 1193 RPM depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers and mixers
- Conveyors and feeding systems
- Agricultural machinery and implements
- Process and food industry machinery
- Turf care and landscape equipment
- Winches, drives, and lifting systems
Technical Highlights
- Inlet pressure up to 225 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: -34 to +82 °C
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
- Seal types: Standard or high-pressure shaft seal/7
Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.
Artikelnummer:
036-0499-003
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Brand Name
Danfoss
Contamination level max.
20/18/13 - ISO 4406
Continuous Flow Max.
61
Continuous power max.
15.6 kW
Continuous rotation max.
600 rpm
Dimension H
163 mm
Displacement
100 cm3
Drainport
G 1/4 BSP
Flange style diameter
82.5 mm
Holes circle
106.4 mm
Inlet Pressure Max.
225
Integrated check valve
Ja
Intermittent Effect Max.
22.4
Intermittent Flow Maks.
75
Intermittent Rotation speed Max.
738
Intermittent Torque Max.
290 Nm
Length
163 mm
Max. operating temperature
82 °C
Model code
MCS100AA07AA111020A000C00C
Mounting flange
SAE-A2
Number of mounting holes
2
Number of outer grooves
6
Oil viscocity recommended
20 - 32 cSt
Port position
Side
Pressure continous max.
175 bar
Pressure intermittent max.
207 bar
Recess
82,55 mm
Shaft Seal Type
High pressure packing
Shaft diameter
25,4 mm
Shaft spline
SAE 6B 1"
Shaft torque rating
395 Nm
Shaft type
Spline
Temperature max.
+82 °C
Temperature min.
-34 °C
Torque continuous max.
248 Nm
Working ports
G 1/2 BSP
Förpackningsstorlek
1 st
Streckkod
485127
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
chn
Intrastat artikelkod
84122981
The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.
Key Advantages
- High efficiency at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Integrated check valve as standard
- Available with standard or high-pressure shaft seal
- Displacement range: 50 to 395 cm³
- Max. continuous pressure up to 175 bar
- Max. intermittent torque up to 503 Nm
- High speed capability (up to 1193 RPM depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers and mixers
- Conveyors and feeding systems
- Agricultural machinery and implements
- Process and food industry machinery
- Turf care and landscape equipment
- Winches, drives, and lifting systems
Technical Highlights
- Inlet pressure up to 225 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: -34 to +82 °C
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
- Seal types: Standard or high-pressure shaft seal/7
Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.
Copyright © 2025 HydraSpecma