XLS 100 Ø25.5mm 6B Spline SAE-A HPS
The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.
Key Advantages
- High efficiency at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Integrated check valve as standard
- Available with standard or high-pressure shaft seal
- Displacement range: 50 to 395 cm³
- Max. continuous pressure up to 175 bar
- Max. intermittent torque up to 503 Nm
- High speed capability (up to 1193 RPM depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers and mixers
- Conveyors and feeding systems
- Agricultural machinery and implements
- Process and food industry machinery
- Turf care and landscape equipment
- Winches, drives, and lifting systems
Technical Highlights
- Inlet pressure up to 225 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: -34 to +82 °C
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
- Seal types: Standard or high-pressure shaft seal/7
Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.
Varenummer:
036-0499-003
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Aksel diameter
25,4 mm
Aksel spline
SAE 6B 1"
Akseltype
Spline
Akseltætningstype
High pressure packing
Antal montage huller
2
Arbejdsporte
G 1/2 BSP
Boltcirkel
106.4 mm
Dimension H
163 mm
Drænport
G 1/4 BSP
Flangens Styrediameter
82.5 mm
Fortrængning
100 cm3
Forureningsgrad maks.
20/18/13 - ISO 4406
Indgangstryk Maks.
225 bar
Integreret Kontraventil
Ja
Intermittent Effekt Maks.
22.4
Intermittent Flow Maks.
75
Intermittent MomentMaks.
290 Nm
Intermittent Rotationshastighed Maks.
738
Kontinuerlig effekt maks.
15.6 kW
Kontinuerligt Flow Maks.
61
Længde
163 mm
Maks. driftstemperatur
82 °C
Maks. moment på aksel
395 Nm
Model kode
MCS100AA07AA111020A000C00C
Moment kontinuerlig maks.
248 Nm
Monteringsflange
SAE-A2
Mærke navn
Danfoss
Olieviskositet anbefalet
20 - 32 cSt
Portplacering
Side
Reces
82,55 mm
Rotationshastighed kontinuerligt maks.
600 rpm
Temperatur maks.
+82 °C
Temperatur min.
-34 °C
Tryk intermitterende maks.
207 bar
Tryk kontinuerligt maks.
175 bar
Udvendigt splineantal
6
Pakke str.
1 st
Stregkode
485127
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
chn
Intrastat varekode
84122981
The Danfoss XLS series is designed for demanding applications requiring low speed and high torque. Based on proven orbital technology and advanced Geroler™ design, these motors deliver high efficiency, reliable performance, and a compact footprint. With integrated check valves and a wide range of shaft and flange options, XLS motors are suitable for a broad variety of mobile and industrial applications.
Key Advantages
- High efficiency at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Integrated check valve as standard
- Available with standard or high-pressure shaft seal
- Displacement range: 50 to 395 cm³
- Max. continuous pressure up to 175 bar
- Max. intermittent torque up to 503 Nm
- High speed capability (up to 1193 RPM depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers and mixers
- Conveyors and feeding systems
- Agricultural machinery and implements
- Process and food industry machinery
- Turf care and landscape equipment
- Winches, drives, and lifting systems
Technical Highlights
- Inlet pressure up to 225 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: -34 to +82 °C
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø 25 mm (code 10) or spline SAE 6B 1" (code 07) depending on model
- Seal types: Standard or high-pressure shaft seal/7
Note: For high-displacement models, external drain lines are recommended to ensure low case pressure and long service life. Always verify the correct seal type and shaft configuration using the full model code.
Copyright © 2025 HydraSpecma