1/2" Throttle/Check valve
Inline throttle/check valve for controlling actuator speed by restricting flow in one direction while allowing free flow in the opposite direction via an integrated check function.
Designed for BSP connections, the valve is installed in-line and selected primarily by thread size, required flow capacity, opening pressure of the check function, and allowable pressure and temperature range. The zinc-plated surface treatment and NBR sealing material are specified for the item.
Typical Applications
- Flow and speed control in hydraulic lines where one direction requires regulated flow and the opposite direction requires free flow
- Inline control circuits for cylinders or hydraulic motors where a check function is required for reverse flow
Artikelnummer:
VRF-12
Förpackningsstorlek:
1 pcs
Minsta beställningskvantitet:
1 pcs
C
G 1/2 BSP
CH
27 mm
D
42 mm
E
38 mm
Flow max.
70 lpm
Flödeshastighet nominell LMin
70 lpm
Gänga
G 1/2 BSP
L
80 mm
Längd
80 mm
Märke namn
OM Oleodinamica Marchesini
Oljeviskositet rekommanderad
30 cSt
Packningsmaterial
NBR
Rekommenderad oljetemperatur
50 °C
Sexkant
38 mm
Temperatur max.
+100 °C
Temperatur min.
-30 °C
Tillverkningsmaterial
Steel
Tryck max.
300 bar
Tryck ôppning
0.5 bar
Tryckkompenserad
No
V
G 1/2 BSP
Ventiltyp
Throttle/checkvalve
Ytskiktbehandling
Zinc-plated
Förpackningsstorlek
1 pcs
Streckkod
197938
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
ITA
Intrastat artikelkod
84812010
Inline throttle/check valve for controlling actuator speed by restricting flow in one direction while allowing free flow in the opposite direction via an integrated check function.
Designed for BSP connections, the valve is installed in-line and selected primarily by thread size, required flow capacity, opening pressure of the check function, and allowable pressure and temperature range. The zinc-plated surface treatment and NBR sealing material are specified for the item.
Typical Applications
- Flow and speed control in hydraulic lines where one direction requires regulated flow and the opposite direction requires free flow
- Inline control circuits for cylinders or hydraulic motors where a check function is required for reverse flow
Copyright © 2026 HydraSpecma